Author Topic: PE250B Vintage Supermotard  (Read 11674 times)

0 Members and 1 Guest are viewing this topic.

Offline James P

  • C-Grade
  • **
  • Posts: 82
    • View Profile
Re: PE250B Vintage Supermotard
« Reply #15 on: January 22, 2020, 08:35:37 PM »
Have you got any more photos or details of that TM pipe Leith? I'm struggling slightly to comprehend which bit is which :o !

Regards,
James

Offline djr

  • C-Grade
  • **
  • Posts: 112
    • View Profile
Re: PE250B Vintage Supermotard
« Reply #16 on: January 22, 2020, 09:25:10 PM »
This isn't quite finished, but there isn't much left to do.

It isn't an 'off-road' bike any more, so may not be to everyone's taste!




More photos and info here: http://diffrentstrokers.com/phpBB2/viewtopic.php?t=2511


Regards,
James

interesting pipe, looks great
 
what is it like when being ridden ? 
does smoke blow up in your face ?     
do you get drops of oil on your left boot / side of bike /  rear tyre ?
does it blow dust up off the ground ?

maybe this type of pipe could have the outlet aimed at the chain to keep it lubed

Offline James P

  • C-Grade
  • **
  • Posts: 82
    • View Profile
Re: PE250B Vintage Supermotard
« Reply #17 on: January 28, 2020, 09:37:11 PM »
maybe this type of pipe could have the outlet aimed at the chain to keep it lubed

;D Now there's an idea!

To answer your questions; I've not ridden it much so far in this configuration, as there is still a small amount of work left to do before registering. However, the silencer exit is angled slightly away from the bike and is below the level of the foot rest, so no smoke in the face and I don't expect any unburnt fuel-oil mixture on the left boot or rear tyre. Still, these are aspects I will be watching out for when the bike gets on the road. Whether it blows any dust remains to be seen - if it does, I might be able to use the bike for clearing the footpath outside the house as well ;) .

Regards,
James

Offline djr

  • C-Grade
  • **
  • Posts: 112
    • View Profile
Re: PE250B Vintage Supermotard
« Reply #18 on: January 29, 2020, 12:59:33 AM »
Thanks for reply,
hope it works as planned