Author Topic: Shed clear out YZ & IT bikes/projects/parts & stuff  (Read 1198 times)

0 Members and 1 Guest are viewing this topic.

Offline Viper666

  • Legend
  • *****
  • Posts: 833
  • "Yes I bought THAT number plate" so sue me!
    • View Profile
    • Ballarat Rovers MCC
Shed clear out YZ & IT bikes/projects/parts & stuff
« on: May 14, 2019, 11:02:41 AM »
Shed clear out. IT's & YZ's bikes & parts for sale (Sorry for the long winded post)

Those who know me will be thinking "you've said this before". Yes I have but this time I mean business. So much so the first lot will be posted today or tomorrow. All will be listed on Ebay to get a wider coverage but all will be open to offers through here & other forums.

Over the next few months/year I'll be selling everything from shed found & basket cases to projects & turn key (Kick start) racers.

None will be shed queens (Not at this stage anyway)

At this point I wont be selling any parts (Apart from the ones listed) until I work out what I need, this is why I am selling heaps, need funds as I will have to buy some parts too. BUT you could drop me a line to see whether 1 I have the part or not & 2 if there is a chance it will come up for sale.

I have stored (Read hoarded) these "projects" for many years with the intention of restoring each & every one back to its former glory but seeing though in the last 10 years or so I haven't even done one it's time I acknowledge some of them aint going to happen. Besides I need the room, shed full. So selling some "As is" so I can restore others.

A couple will come with the option of various NOS OEM plastics (No plastics for sale at this time, don't have many anyway)

A list of what I intend to part with (At this stage)

First unrestored/projects/basket cases followed by restored/race ready Then left over parts (NOS, new after market & S/H) but that wont be for ages.

I will list individually when I actually drag them out

First cab off the rank a 1980 IT125G (Unrestored but 99.99% complete)

Will take me a while to sort out the following;

1983/84 IT250K/J Not matching numbers so need to check frame & engine serial numbers to ID the year/s

Project/basket case 1979 YZ250F (Unsure of what parts it will come with yet)

1980 YZ100G (Rare I've been told) project roller with engine pipe & some plastics. Comes with after market alloy swing arm which I "Think" came off a YZ125D so the arm, not hte bike, would be pre78 legal.

1977 IT250/400 frame & swing arm (Think I may have an engine)

1977 YZ250D frame & swing arm only (Can be used as 400D or E)

1977 YZ 400D frame & swing arm only (Can be used as 250D or 400E)

The main difference between the YZ D & the E was the E's were a chromoly frame with an alloy swing arm.

DT175 engine & parts (Need to check the year)

Project 1981 YZ80H This was a runner & ran well but had a carby issue.

Project/basket case 1978 YZ125E probably just frame, swing arm, and some engine bits & pieces.

A 1979 YZ400F but not sure if I will restore or sell this one as a project yet, still deciding.

1978 YZ250E complete

1979 YZ125F race ready

1979 YZ250F race ready

1979 YZ400F race ready, will be a Bob "Hurricane" Hannah tribute.

1980 YZ125G x 2 one restored & depending on left over parts whether I do the 2nd or sell as a project

1980 YZ250G x 2 one restored & the other probably as a project, again will need to see what parts are left over after the 1st

And last but not least;

1981 YZ250H race ready (Tempted to keep this one as it still has the 43mm forks & twin leading front brake.

OK need to make a start. Pics & more info on the IT125G tonight (Hopefully)
Thank the Lord for Melbourne Bitter, anti-inflamatory drugs & an understanding wife.
YZ80H, YZ100G, YZ125E, YZ125F, YZ125G, YZ250D, YZ250E, YZ250F, YZ250G, YZ250H, YZ400F, IT125G, IT250K & a, a, a,      CRF250X???????    

How the FUG did that sh*tbox Honda get in here?

Offline YZ250H

  • Legend
  • *****
  • Posts: 2111
  • Back in QLD Baby !
    • View Profile
Re: Shed clear out YZ & IT bikes/projects/parts & stuff
« Reply #1 on: May 15, 2019, 07:31:48 AM »
Following  ;D ;D
Looking for YZ250C parts NOS if possible

"My inability to use emoticins in the right context is really getting me down :)
The only triple jumps he would have been doing are the hop, skip & jump.

Offline enzo906

  • C-Grade
  • **
  • Posts: 73
    • View Profile
Re: Shed clear out YZ & IT bikes/projects/parts & stuff
« Reply #2 on: May 17, 2019, 12:32:29 PM »
I am interested in the 250g and 250h (one only) with view to race vmx etc so will be checking for more posts etc

Offline Husk72

  • B-Grade
  • ***
  • Posts: 234
  • Attitude? What effing attitude?
    • View Profile
Re: Shed clear out YZ & IT bikes/projects/parts & stuff
« Reply #3 on: May 19, 2019, 11:37:16 AM »
Interested in the 400D frame.
I used to drink a lot.
I still do,but I used to,too.

Offline TT5 Matt

  • Legend
  • *****
  • Posts: 1489
    • View Profile
Re: Shed clear out YZ & IT bikes/projects/parts & stuff
« Reply #4 on: May 19, 2019, 09:56:59 PM »
Mark those dt360a motors should nearly go in the yz400d frame with only needing the front engine mount plates rejigging though the carb will need work

Offline relfy

  • B-Grade
  • ***
  • Posts: 175
    • View Profile
Re: Shed clear out YZ & IT bikes/projects/parts & stuff
« Reply #5 on: June 07, 2019, 03:36:02 PM »
pm sent

Offline alexbrown64

  • Legend
  • *****
  • Posts: 697
    • View Profile
Re: Shed clear out YZ & IT bikes/projects/parts & stuff
« Reply #6 on: July 10, 2019, 10:40:20 PM »
First dibs on the YZ125G stuff if it becomes available.