Author Topic: Help: Torque Settings for Cylinder Head 1983 XC500 Husky  (Read 262 times)

0 Members and 1 Guest are viewing this topic.

Offline PBMGold

  • C-Grade
  • **
  • Posts: 130
    • View Profile
Help: Torque Settings for Cylinder Head 1983 XC500 Husky
« on: June 05, 2017, 03:13:11 PM »
Can anyone advise what the torque settings are for 1983 500 Husky cylinder head. Thanks.

Offline b490

  • Legend
  • *****
  • Posts: 529
    • View Profile
Re: Help: Torque Settings for Cylinder Head 1983 XC500 Husky
« Reply #1 on: June 05, 2017, 06:45:25 PM »
 The 4 x Cylinder head Nuts : 33Nm
 The 2 x Cylinder head Bolts : 25Nm

 Regards ,
                   Steve
                     

Offline 80-85 husky

  • Legend
  • *****
  • Posts: 3439
    • View Profile
Re: Help: Torque Settings for Cylinder Head 1983 XC500 Husky
« Reply #2 on: June 05, 2017, 06:50:16 PM »
hva factory have downloadable manuals etc...I think it has a tech details doc with all those numbers

Offline PBMGold

  • C-Grade
  • **
  • Posts: 130
    • View Profile
Re: Help: Torque Settings for Cylinder Head 1983 XC500 Husky
« Reply #3 on: June 06, 2017, 09:16:58 AM »
Thanks Steve, extremely helpful.

Tried HVA Factory and Café Husky and both have 4 Stroke Manuals but only a Parts list for the 2 strokes. Café Husky has nearly every other year as I would love to get a Workshop Manual for XC500 1983 and WR250 1983. So far no luck, although open to any other suggestions.

Offline b490

  • Legend
  • *****
  • Posts: 529
    • View Profile
Re: Help: Torque Settings for Cylinder Head 1983 XC500 Husky
« Reply #4 on: June 06, 2017, 03:18:47 PM »
Very good ,  timely  &  reliable,   supplier of  Husky bits  & has  (CD ) manuals available too :)
 
 Reasonable shipping rates , on previous purchases  , but be sure to email ( as requsted)  prior to placing order.

http://www.husqvarna-parts.com/page/page/4106636.htm

 Regards ,
                 Steve
 
« Last Edit: June 06, 2017, 05:03:55 PM by b490 »