Messages

1

Spaniards (Bultaco, Ossa, Montesa etc) / Re: Montesa Cappra 414 VF re-built

« on: March 07, 2019, 09:50:01 PM »

Hi Jurado, sorry i only just saw this topic.   I will have a good look at it .

Regards Sandy

2

Spaniards (Bultaco, Ossa, Montesa etc) / Re: 360H6/Cappra414 interchangeability

« on: May 02, 2013, 06:32:10 AM »

Yep that is true but they are out there. They seem to be available in Spain but they are just so hard to deal with.

Also true !! 

3

Spaniards (Bultaco, Ossa, Montesa etc) / Re: 360H6/Cappra414 interchangeability

« on: April 29, 2013, 07:15:18 AM »

88mm is standard bore for 414. Yes you can run the 360 primary but I am not sure about the ratio as 414 and H6 are not the same from memory. Also not sure about the helical gear load capacity for the 414 either. The 414 may have heavier springs and extra plates. Jared would know. I'll see if I have a 414 parts book PDF file to send you.

Pistons for 414 are getting harder to find. Contact Jared at http://www.southwestmontesa.com/ or John at http://www.rmmontesa.com/

Pistons for  414's have been hard to find for years !!!!!!!!!!!
Sandy

4

Spaniards (Bultaco, Ossa, Montesa etc) / Re: Montesa 414vf

« on: February 12, 2013, 04:21:35 AM »

Well my old girl in is this months classic dirtbike magazine issue 26  chuffed to bits with what they have done with the photo's and right up 

Good for you mate, i might have to buy it!!

Sandy

5

Spaniards (Bultaco, Ossa, Montesa etc) / Re: 414VG engine into 250VG frame

« on: January 12, 2013, 08:05:44 AM »

Pile of shit.....................
Told you it would not be right.!! 
Sandy

6

Spaniards (Bultaco, Ossa, Montesa etc) / Re: Cappra VF250

« on: September 19, 2012, 07:33:02 AM »

  Problem is you can break them up and make more dosh.

The spirit of VMX lives on.....

Wasnt what i had in mind . Just generalising mate. 

7

Spaniards (Bultaco, Ossa, Montesa etc) / Re: Cappra VF250

« on: September 19, 2012, 04:16:07 AM »

How much would you let a vg go for??

Depends which one mate.  pm me if you are really keen on one.  Problem is you can break them up and make more dosh.

8

Spaniards (Bultaco, Ossa, Montesa etc) / Re: 414 VG on e-bay

« on: September 18, 2012, 02:24:24 AM »

Hummmmm I think I will have to have a bid on this one  http://www.ebay.co.uk/itm/Montesa-Cappra-414VG-vintage-motocross-twinshock-trials-bike-/221126028116?pt=UK_Motorcycles&hash=item337c236b54

Go on, you know you want to!.  Be warned i have the ex owner of the very 1st 414VG i bought desperate to buy this one.

Sandy

9

Spaniards (Bultaco, Ossa, Montesa etc) / Re: Cappra VF250

« on: September 18, 2012, 02:23:03 AM »

Nah, i need another cappra like i need a hole in the head!  In fact i have stuck one of my 414vg's on ebay just now.

Just seen your vg on fleebay  Very nice  But why are you getting rid of it mate??

Simon, i have 4 complete 414vg's/1 part complete,   a vb250 and a 330 cota.  I want to start restoring a really good original 414vg i have .  Kinda want to free up some space and a few quid would also help...!!

10

Spaniards (Bultaco, Ossa, Montesa etc) / Re: Cappra VF250

« on: September 17, 2012, 07:02:32 PM »

Nah, i need another cappra like i need a hole in the head!  In fact i have stuck one of my 414vg's on ebay just now.

11

Spaniards (Bultaco, Ossa, Montesa etc) / Re: Cappra VF250

« on: September 17, 2012, 01:05:26 AM »

Is it on its way over to the uk??

Not to me anyway Simon.

12

Spaniards (Bultaco, Ossa, Montesa etc) / Re: Cappra VF250

« on: September 11, 2012, 07:47:13 PM »

I could be if you can ship the bike to the UK....

cheers Sandy

13

Spaniards (Bultaco, Ossa, Montesa etc) / Re: cappra 414s

« on: September 01, 2012, 03:49:56 AM »

I dont have photos but my friends wife took some if i can get them off her i would love to post photos on this forum but i do not know how as i am useless with that sort of thing any ideas anyone?.

Mind you i will get moans about them as i have put mudguards on them from a more modern honda they dont look as good as the montesa ones but i can destroy them in racing and know that i can replace them with ones off the self,yes i do have some new old stock monty ones (not fiberglass)and those are put on for showing not racing.

Montman, get her to email them to me and i will stick them on.

Sandy

14

Spaniards (Bultaco, Ossa, Montesa etc) / Re: cappra 414s

« on: August 30, 2012, 03:10:57 AM »

Nice one Matey.  Keep up the good work.  Give you a call soon.!

Cheers Sandy

15

Spaniards (Bultaco, Ossa, Montesa etc) / Re: 414VG engine into 250VG frame

« on: August 16, 2012, 03:27:21 AM »

That looks fantastic Jared.  Could he make another one for me at all??
Sandy.

p.s you will kill yourself with that kickstart!!!