1
Vinduro / Re: Vinduro VTR 2 Days Canowindra N.S.W 21st & 22nd July 2018
« on: July 16, 2018, 09:09:14 PM »
No , he didn't cut any trees down he was just scared some of the branches away so they don't poke any eyes out 
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Wanted / Re: 1983 CR125
« on: June 25, 2017, 08:01:08 PM »
I have 1987 CR125 airbox assy if that is any good to you ?
3
Vinduro / Re: VTR Vinduro Bulahdelah now Moving to a Dryer Venue 17th & 18th June 2017
« on: June 15, 2017, 08:52:27 PM »
Talking to Dennis & Greg tonight , the track is looking fantastic.
We are going over Friday , so might be able to add a few more sections into loop.
Anyone looking for a ride just turn up on Saturday to enter & ride.
The weather is perfect for vinduros. See you there.
Cheers Woodsy
We are going over Friday , so might be able to add a few more sections into loop.
Anyone looking for a ride just turn up on Saturday to enter & ride.
The weather is perfect for vinduros. See you there.
Cheers Woodsy
4
Suzuki / Re: Exhaust to silencer connector
« on: June 08, 2017, 06:32:42 PM »
MX store have them. $7.95
5
Honda / Re: Mono happy XR200
« on: June 05, 2017, 10:18:22 PM »
The swing arm is off 2000 XR 600r disc brake model which has alloy linkages. Had to machine outside of steel stepped bushes on pivot down to about 2mm then grind inner hardened sleeve to a few thou wider than finished pivot.
Loosened rear eng mount bolts & jack frame apart to slide in. One of the eng mount bolts is spaced with a washer.
Could not use outer seals so fitted large 'O' rings & keep it well greased.
Ground off brake caliper mounts then had a mate fabricate and Tig a lug to locate original rear wheel with a wider spacer on left side.
Used the XR 600 alloy lower link as it fits 82 Xr 200 frame. Had to cut ends off then fabricate new link to be 13mm offset & 98mm long. Make sure grease nipple orientation is correct.
Used original 200 shock which fits 600 linkages perfectly.
Didn't have to cut or modify frame to fit.
I will be at Bulahdelah Vinduro if anyone wants to check it out.
Cheers Woodsy
Loosened rear eng mount bolts & jack frame apart to slide in. One of the eng mount bolts is spaced with a washer.
Could not use outer seals so fitted large 'O' rings & keep it well greased.
Ground off brake caliper mounts then had a mate fabricate and Tig a lug to locate original rear wheel with a wider spacer on left side.
Used the XR 600 alloy lower link as it fits 82 Xr 200 frame. Had to cut ends off then fabricate new link to be 13mm offset & 98mm long. Make sure grease nipple orientation is correct.
Used original 200 shock which fits 600 linkages perfectly.
Didn't have to cut or modify frame to fit.
I will be at Bulahdelah Vinduro if anyone wants to check it out.
Cheers Woodsy
6
Honda / Re: Mono happy XR200
« on: June 04, 2017, 09:22:27 PM »
I've got an XR 600 alloy swingarm on mine as well as 87 CR 125 forks.
Made the bike a lot more stable in the rough stuff & still good in the tight going.Great for vinduros.
As always,it's limited by rider skill & fitness.
Made the bike a lot more stable in the rough stuff & still good in the tight going.Great for vinduros.
As always,it's limited by rider skill & fitness.
7
Vinduro / Re: VTR Vinduro 2 Day Vinduro 1st & 2nd April 2017 at Canowindra N.S.W
« on: March 22, 2017, 09:46:42 PM »
Getting plenty of rain out this way. 100mm at Parkes this week & still raining.
I hope the pits don't get as wet as last time we were there.
Don't care because the track was brilliant.
Can't wait.
I hope the pits don't get as wet as last time we were there.
Don't care because the track was brilliant.
Can't wait.
8
Wanted / Re: cr250/500rf shock parts
« on: February 24, 2017, 09:31:34 PM »
are 87 cr 125 or 89 cr 250 shocks any good for you
10
Honda / Re: Best way to make an XR200 a Mid Field Gun
« on: December 23, 2016, 04:54:27 PM »
1987 CR 125 triple clamps fit straight into 1982 XR 200r with only a 16 mm alloy spacer between top bearing & upper triple.
11
Wanted / Re: 1985 honda cr250 rear shock.
« on: November 07, 2016, 08:04:49 PM »
Is 89 CR 250 any good for you ?
12
Vinduro / Re: VTR Vinduro Braidwood 2 Day Vinduro 10th &11th September 2016 N.S.W
« on: September 05, 2016, 05:32:35 PM »
Thanks.By the weather forecast may be a shower on Friday so will keep a check on things.
There were quite a few 4x4s at Canowindra that were having a wee bit of trouble going anywhere ?
There were quite a few 4x4s at Canowindra that were having a wee bit of trouble going anywhere ?
13
Vinduro / Re: VTR Vinduro Braidwood 2 Day Vinduro 10th &11th September 2016 N.S.W
« on: September 04, 2016, 07:09:48 PM »
Not worried about my 1 wheel drive bike but after all the rain how will the property road & camping area hold up for next weekend ?
Are they 2 wheel drive suitable or would a 4 wheel drive be good insurance ?
Are they 2 wheel drive suitable or would a 4 wheel drive be good insurance ?
14
Vinduro / Re: VTR Vinduro Canowindra 2 Days 18th & 19th June 2016 N.S.W
« on: June 19, 2016, 07:17:44 PM »
Was 1 of the most enjoyable loops ever. The weather made for wet loam but still plenty of grip except for a couple of spots. But not so many ruts and plenty of flowing trails. As usual another great job from VTR.
Pages: [1]