Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - Tossa

Pages: [1] 2 3 ... 8
Husqvarna / 1990 WXE 250 Inlet manifold and Rod Kit
« on: November 24, 2018, 02:29:07 PM »
Looking for an inlet manifold part no 8000 66471 and a rod kit for WXE 250


Bike Transport / Mt Martha (Vic) to Ararat Nats
« on: September 07, 2018, 10:25:18 AM »
Looking for anyone who could help get a bike from Mt Martha (Mornington Peninsula) to Ararat, enduro bike being taken back to WA by a mate


Yamaha / 83 IT250K piston pin
« on: April 02, 2018, 03:53:07 PM »
Ok the IT250K lemon that keeps giving, removed the old barrel and piston went to insert new piston and found the piston pin needed was a different size. The piston and pin removed were wiseco and the pin was 57mm long. I now need a pin I believe to be 61mm long. the Piston I do not know what make but details are on the face has CD and -010 printed and under the pin support has the number 504 and on the other one an indescribable stamp. If anyone has the original pin part 214-11633-00 could they tell me the length. Or can anyone identify the piston. Need pin and circlips, thanks Barry

Spaniards (Bultaco, Ossa, Montesa etc) / Ossa Super Pioneer 350
« on: February 22, 2018, 10:32:10 AM »
I have just had a bloke contact me with a super pioneer 350.  Wanted some info.

Are there many in Australia?

Who imported them?

Any other info on them

He also asked did any dealer import the Ossas in the 2000's when there was a resurregence


Spaniards (Bultaco, Ossa, Montesa etc) / Ossa SDR rear suspension
« on: July 17, 2017, 04:36:26 PM »
Can anyone give me the size of the rear shocks.  I have the following dimensions (approx)

top 15mm interior, 25mm wide

length 340mm

bottom 12mm interior 25mm wide

Hope that makes sense



Yamaha / IT250K Head
« on: June 19, 2017, 05:45:32 PM »
Took the bike out for it's fiorst run, blew the head gasket, not happy

On inspection of the head it has 5 studs and a bolt at the rear of the head.  My parts catologue shows there to be six studs in the head not 5 and a larger  8mm bolt.

Can anyone explain?

Also torque settings for the studs and larger bolt



Yamaha / IT250K questions
« on: May 29, 2017, 12:39:12 PM »
Bought a 1983 IT 250K very happy but have a couple of questions

Tail light

the manual I have shows a complete assembly required, which I am having problems finding.  Yet some pics show the IT with basically the lens attaching direct to the fender.  Any help is good

the Kick Stand gusset.

worthwhile trying to weld new piece on or can a universal kick stand be purchsed that works



Yamaha / IT250K
« on: May 17, 2017, 02:07:02 PM »
Mate running a 250 at 25:1 using  Castrol TTS synthetic

I have been running my bikes at 40:1 (not IT)

Just wondering what everybody else is running ratios and plug.  Just think 25:1 with synthetic might cause problems, but i could be wrong


Spaniards (Bultaco, Ossa, Montesa etc) / Ossa Fibreglass tanks
« on: March 14, 2017, 12:08:35 PM »
Anybody had problems with the fibreglass tank not being suitasble for modern fuels.  Murray grant has had one go to "jelly'.  I have a SDR tank I am looking at sealing



Husqvarna / 74 Husky cr250 rear wheel
« on: October 10, 2016, 02:46:18 PM »
Looking for either a complete rear wheel or jus the hub.  Damaged my left hand and can't change tyres anymore.  Want to do dirt track and speedway meets so would like a wheel with trials tyre already set up to swap.

Can anyone help

I'm in WA



Honda / 1974 Honda CR125 Wanted
« on: April 20, 2016, 01:27:04 PM »
Darryl Mitchell 0459 109 099 over here in the west is looking for a 74  Honda CR125, complete bike doesn't have to be running.  Can be picked up from the Nationals in June

cheers Barry

Wanted / 1974 Honda CR125 wanted
« on: April 20, 2016, 01:25:49 PM »
Darryl Mitchell 0459 109 099 over here in the west is looking for a 74  Honda CR125, complete bike doesn't have to be running.  Can be picked up from the Nationals in June

cheers Barry

Spaniards (Bultaco, Ossa, Montesa etc) / Ossa SDR basket case
« on: April 11, 2016, 10:36:58 AM »
Some days in your life turn into diamonds.  During the week a gentleman rang me and offered me an Ossa Pioneer basket case for free.  I thought why not, almost finished the Rickman Zundapp, no spare cash to buy anything, might at least have a look.  My bottom jaw almost hit the floor when I got this


exhaust and other bits

air cleaner, bash plate, wiring lights

motor complete was running

new seat, tank badges

frame powder coated and wheels, forks all done

all the fibreglass needs painting etc

chromed parts and rear brake

Suzuki / 79 PE175 Stator
« on: March 08, 2016, 11:06:17 PM »
Have a guy looking for a replacement stator, can you help

Pages: [1] 2 3 ... 8