Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Canam370

Pages: [1] 2 3 ... 7
1
Wanted / CZ '980' front axle needed
« on: June 27, 2017, 07:58:47 AM »
Does anyone have a front axle for a '980' CZ they'd consider to selling? It's the longer type that uses a nut to lock it up.

2
Like the subject asks can anyone transport a wheel-less bike from the Resto Expo 11/12 March at Dargle NSW to Melbourne or somewhere close by to Melb? It's a short travel mx'er with the forks and wheels out so won't take too much room. Happy to discuss renumeration or trades.  :)

3
For Sale / YZ250H 4V3 wrecking
« on: August 25, 2016, 05:15:29 PM »
I have available

frame $150
swingarm with chain guide $150
rear shocker. Has damping. $250
Front forks. Straight but have some rust pitting. Straight and repairable - usable in a pinch. $120
Triple clamp set. $50
Front wheel with brake plate. $100
CDI. Condition unknown $50
Rear brake pedal - alloy. $40
Airbox with filter cage and inlet boot (not rooted) $80
Engine bottom end. No clutch parts, no covers. Crank spins freely as do the gearbox shafts. No case damage from tossed chain.$300
Cylinder head. $30
Rear wheel with brake plate . Rim in good condition (negligible rot) and no broken sprocket mount lugs. $150

Frame and engine numbers match.
Located Melbourne.

4
I've picked up some set-up booklets for the models listed above.

cr50/60 1984
CR80 84, 85,93
CR125 84,85,86,88,93,94
CR250 84,85,86,88,93,94,96
CR500 84,85,86,88,93,94,95

These were supplied with the bikes in the crate to show how to assemble them. Just the ticket for a nice literature trail to enhance a total resto package.

$15ea + post.
Next destination Feebay!

5
For Sale / Wrecking incomplete YZ100C
« on: July 06, 2016, 04:36:14 PM »
Forks (not rusted) and triples
Front wheel with brake plate and axle
Rear wheel with brake plate and axle
Some electrics
Airbox complete

These parts suit various models from YZ250-360A/B, MX250/400, IT175/400, YZ125X to........

6
General Discussion / Australia awarded Six Day victory!
« on: November 19, 2015, 09:39:28 AM »
Hot off the grapevine - Australia have been awarded the win for the Six Day. How good is that!!! Apparently France was relegated to 28th position.

7
For Sale / NOS Yamaha IT250H fork springs.
« on: June 10, 2015, 10:25:47 AM »
3 NOS fork springs 4V5 Yamaha IT250H. $20each or 3 for $50 (+ post).
#4V5-23141-10

8
Vinduro / 2015 Harrow Vinduro, July 25-26.
« on: May 06, 2015, 07:32:24 PM »
Well, only 2 vinduro's in Vic (Beaufort 9/10 May and Hopetoun 20/21 June) as 'warm-ups' before the Harrow classic in July! Best do these two as riding conditioning 'coz you'll need your wits about you if you want to survive the bogs, rivers, greasy logs, fuel bowl emptying open runs and navigation tribulations!

The Europeans took the guernsey last year as, not unexpectedly, the pre-eminent enduro machinery. The riders peeled off an outstanding number of cumulative laps, soundly smashing the Oriental machines riders paltry efforts.

It seems that this year the riders of the Asian leaf blowers have underhandedly lobbied some members of the VERi committee to try and turn back the clock on last years result by having the Harrow course RUN IN THE REVERSE DIRECTION this year! I suspect that Mr GMC has had something to do with this as it seems he has abandoned his Factory Ride BMW175 to putter about on some not quite ripe green thingy and it appears he is looking for any 'advantage' (perceived or otherwise). Not to worry, he patently has cognitive issues if he can't recognise having been on a good thing with the mighty Bimmer.

Stay tuned.

9
For Sale / Can Am and KTM sell-off.
« on: February 11, 2015, 09:10:00 PM »
Posting on behalf of a forum member (it's not my stuff! :D).

Can Am, KTM,Cagiva  sell off
I have a few Can Ams, KTM'S and a Cagiva for sale as well as a number of KTM Parts
Bikes are :
Can Am 250 mx6
Can Am 175 Qualifier 4
KTM 250 - 1983 MX
KTM 125 - 1982 MX
KTM 125 - 1983 MX
KTM 250 - 1984 GS  SOLD
KTM 250 - 1985 GS
Cagiva 125 1982 Enduro  SOLD
 
KTM Parts for a number of models
 
Please contact me via Email with a contact number and I will contact you.
 
steve.woodford@bigpond.com.au

Get in quick! Lotsa good stuff here for the discerning rider.

10
General Discussion / Trouble posting ads on Marks swap.
« on: January 23, 2015, 02:37:33 PM »
Anyone had any dramas posting ads lately? I've posted there before without a hitch but since the latest kerfuffle I have tried 3 times to post a 'Wanted' ad with no luck. Tried emailing Mark as well with no reply.

11
General Discussion / What a waste - bloody admen!
« on: January 09, 2015, 10:21:55 AM »
In a weak moment I took a little notice of a TV ad by a insurance company (because it featured a bike!) and was a bit horrified to see them crash an RL250 into the side of a bus! It was meant to be humourous but I wasn't laughing! Shocked I tells ya! Couldn't they have used a bike that no-one would miss, like a IT or Hodaka or such?

12
Wanted / Aprilia Climber 240 parts.
« on: January 01, 2015, 04:10:00 PM »
Hoping someone can help with a sidestand and mount, and a kickstart lever?

13
Other Makes (CanAms, Coopers, etc) / Canam 250 MX6-B for sale.
« on: November 16, 2014, 10:16:23 PM »



More pics available. Located Melbourne. Starts and runs well but needs a going over before use as its been sitting awhile. No issues and sporting some battle scars. Canam Ohlins shockers but the springs are a bit light - shafts good. Kickstart shaft good. Respoked wheels. Nothing not working or munted but the pics dont reveal small marks etc. $4000 ono.

14
For Sale / Canam 250 MX6-B for sale.
« on: November 16, 2014, 06:07:42 PM »


More pics available. Located Melbourne. Starts and runs well but needs a going over before use as its been sitting awhile. No issues and sporting some battle scars. Canam Ohlins shockers but the springs are a bit light - shafts good. Kickstart shaft good. Nothing not working or munted but the pics dont reveal small marks etc. $4000 ono.

15
For Sale / YZ250 88-91 605P4 piston kit. New.
« on: November 04, 2014, 04:04:32 PM »



New 1.00mm o/s Wiseco piston kit. Pin, clips, rings and piston. Just the ticket for your pre90 racer! $75 + post.

Pages: [1] 2 3 ... 7