Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - Ted

Pages: [1] 2 3
Competition / 2016 MoMS out
« on: December 14, 2015, 02:21:07 PM »
On the MA website

Pre 75: NO reed valves permitted.

If you own a Husky mag, Pre 75 YZ or DT it's off to Evo for you.


A date of Pre 90 has been placed on Evo. So while it must be air cooled, drum braked and non linkage you can source all components from up to and including a Pre 90 bike including the U.S.D. Fork

All eras:

Engines and gearboxes must be externally unchanged has had a line drawn through it and is no more.

Well done the rule makers at MA. You have just signed the death warrant for your own title events

Wanted / 1976 YAMAHA YZ 125 C
« on: June 14, 2015, 03:15:21 PM »
Looking for the above. Anything considered

We plan to have a '77 RM 125 B for the International 125 and '81 YZ 465 H for the International 500

General Discussion / Holiday Register
« on: December 19, 2014, 11:18:54 PM »
Due to the holiday season forthcoming i have set up a register for people to list their names and dates that they wish not to be contacted.

Wanted / Yamaha air filter cage
« on: September 27, 2014, 03:02:59 PM »
Im after an air filter cage for a 1981 YAMAHA IT 250 H if anybody has a spare one or knows where I can get one new or old.

Part # 3 R4-14458-00-00

Same cage fits the following Yamaha models:

1981 IT 250 H / IT 465 H   1981 YZ 250 H  / YZ  465 H

1982 IT 250 J /  IT 490 J    1982 YZ 250 J   / YZ  490 J


Vinduro / 1981 IT 250 H air filter cage
« on: September 27, 2014, 10:58:01 AM »
I am chasing the air filter cage for the above model if anybody has a spare or knows where one can be bought new or old


General Discussion / Coincidence
« on: August 04, 2014, 09:16:04 PM »
1987: Wayne Bennett tells Canberra he's leaving.    Manly win the comp

2008: Wayne Bennett tells Brisbane he's leaving.     Manly win the comp

2011: Wayne Bennett tells St George he's leaving.   Manly win the comp.

2014: Wayne Bennett tells Newcastle he's leaving.   Manly WILL win the comp.

General Discussion / GMC
« on: May 07, 2014, 05:50:34 PM »
Hi Geoff,
             What's going on with your work phone 03 5784 1446? Says not connected.

I need to speak with you RE: Exhaust 1981 Yamaha IT 175 ASAP

Cheers Ted


Vinduro / IT 175 H air box cage and nut
« on: April 06, 2014, 05:51:53 PM »
Does anybody have a air box cage and nut for a 1981 IT 175 H that they would part with. It's the same cage and nut as a 1981 YZ 125 H

Could somebody post this on the site for me please.


General Discussion / BEER
« on: March 11, 2014, 07:04:29 PM »
Just drinking a stubby of Carlton Dry.

The label reads " The extended brewing process removes sugars creating a smooth crisp finish with lower carbohydrates "

Smooth crisp finish...WTF 

It's starting to rival wine with its BS spiels

What do other beers say ?

Vinduro / IT 200 S
« on: January 30, 2014, 09:43:23 PM »
After a marathon 17 hour session at Teknik last Saturday it lives.

A huge thank you goes out to my mate, Nick Dole at Teknik Racing for turning this old bike into what you see here.

After wheeling it into his shop at 8am he pulls it completely apart. Supplies and fits new steering head bearing kit, new swingarm bearings, new linkage bearings, new front and rear tyres, new tubes, new rim bands, new rim locks, new gear lever, new 34mm carby, new throttle cable, new grips. Services and fits V4S travel control valves and new springs in the fork. Drills out PFR pegs to accomodate larger pins. Cuts and bends DG pipe to fit neatly and makes new brackets to mount pipe and muffler. Fits new engine bolts. Machines nylon spacers to space sidecovers. Machines new chain roller. Heat guns plastics to fit properly.

At 10pm he has the shock dismantled on his bench. He tells me its fu...cked and he doesnt have the parts in stock to fix it. I say no prob, you have done well and it is 10pm after all. He then walks out the back and grabs a 50mm solid piece of aluminium bar, sticks it in the lathe and makes a new seal head and all the other bits he needs.

At 1am Sunday morning he starts it up and rides it down the road to test it, adjusts carby and we load it into my trailer. Job done.

All of this work was done in house, on one day by one man. There wouldnt be a bike shop around with the capability and the inclination to give a customer this type of service.

People ask me why do i always take my bikes to Teknik. Well there are bike shops with mechanics and then there is Teknik Racing.

Bike Talk / Chain support ( guard )
« on: January 20, 2014, 03:40:20 PM »
Can someone please point out to me where in the MoMS does it state one has to be fitted to the rear wheel for a EVO bike.


Vinduro / IT 200 Bearings
« on: November 22, 2013, 04:16:22 PM »
Where do you guys get the rear linkage bearings for a IT 200 from. Is there an aftermarket kit available?

1 x 93317-32034-00 Bearing. $72.20 from Yamaha.

2 x 93315-31732-00 Bearing. $155.30 from Yamaha

2 x 93109-20076-00 Oil Seal. $30.70 from Yamaha

All these parts are available from Yamaha. At those prices I can see why.


General Discussion / North Island NZ
« on: October 29, 2013, 09:02:59 AM »
The wife and I are touring New Zealand over Xmas. Can somebody fill me in on the must do's on the North Island. We have a motor home for ten days. Are prepared to drive 500 klms a day just as we did on the South Island two years ago. As we are in our 50's exclude blue light discos, raves, art galleries and botanic gardens etc. Like to see and learn Mairo culture, heritage and scenery.

Besides Bill said that if I didn't return his Parts book pronto he would sick the Guvnor onto me ;D


Competition / Works bikes
« on: October 28, 2013, 06:27:32 PM »
If I was to buy a RN or RA Suzuki works bike would it be eligible to ride at the Aussie Titles.

Pages: [1] 2 3