Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Tossa

Pages: [1] 2 3 ... 139
1
Competition / Re: 2019 Australian 3 Day Vintage Enduro
« on: December 02, 2018, 08:46:18 PM »
I agree with all comments made before and good luck to the event in the context in which it is being run.  It just excludes those who ride a bike within the definition of classic etc, and is based on one clubs interpretation without (as far as I know) consultation with other clubs who are purely vinduro clubs and then are given the right to call the event "Australian", in a event that does not have any form of classification.  Seeing as the event is running under MA, MoMs must be applied in some context.  Seeing as vinduros are not recognised, then are bikes to be as per enduro bikes within MoMs.  I would love (as a club) to have been brought into the conversation regarding the classification of classes.

You turn an event into a competitive event MoMs definitely come into the equation.

Do not get me wrong this is a great step forward and I hope it is a resounding success, it's just a pity that some of us will not be able to ride our bikes, because of the restrictive nature of the classes.   Oh and I am a mobile chicane on my bike

Barry

2
Competition / Re: 2019 Australian 3 Day Vintage Enduro
« on: December 02, 2018, 01:30:19 PM »
So if that's the case it's not the Australian 3 day vintage enduro it is the VERi 3 day vintage enduro

Barry

3
Competition / Re: 2019 Australian 3 Day Vintage Enduro
« on: December 02, 2018, 03:16:06 AM »
Why pre88 why not pre95 as in  MA post classic MX etc.  Our vinduro club in WA is pre95, or is this just based on VERi club criteria.   Isn't one of the other vinduro club something like pre93

Barry

4
Husqvarna / 1990 WXE 250 Inlet manifold and Rod Kit
« on: November 24, 2018, 02:29:07 PM »
Looking for an inlet manifold part no 8000 66471 and a rod kit for WXE 250

Barry

5
Bike Transport / Mt Martha (Vic) to Ararat Nats
« on: September 07, 2018, 10:25:18 AM »
Looking for anyone who could help get a bike from Mt Martha (Mornington Peninsula) to Ararat, enduro bike being taken back to WA by a mate

Barry

6
Competition / Re: Classic Nats in Sept
« on: September 07, 2018, 10:23:29 AM »
Anybody able to take a bike from Mt Martha (mornington Pen) to Ararat for me, not racing, just an enduro bike I'm trying to buy that will be taken back to WA

cheers

Barry

7
Competition / Re: Post classic nationals Sup regs.
« on: June 05, 2018, 07:11:26 PM »
I understand that Mick, but where they are all capacity in the championships I feel it would be rather hard. Unlike with age groups where you can combine.  Even so still a very big day

8
Competition / Re: Post classic nationals Sup regs.
« on: June 05, 2018, 06:40:42 PM »
Thanks , your right Tossa no room for any problems .

10 minutes a race x 60 = 10hrs

9
Competition / Re: Post classic nationals Sup regs.
« on: June 05, 2018, 06:04:51 PM »
Sup Regs shows no racing saturday and if all classes fill then 60 races on Sunday, damn big day!!!

10
Yamaha / Re: 83 IT250K piston pin
« on: April 02, 2018, 08:42:35 PM »
been in touch with Serco, not wiseco.  Piston taken out was 4th oversize with 57mil wrist pin pistons for this model from wiseco stat 515.  Went to put this on and totally different length.

Barry

11
Yamaha / Re: 83 IT250K piston pin
« on: April 02, 2018, 06:18:44 PM »
no came as a job lot with barrel and head. Guy who sold it to me didn't supply box and didn't know where or what it is other than correct size.

cheers

Barry

12
Yamaha / 83 IT250K piston pin
« on: April 02, 2018, 03:53:07 PM »
Ok the IT250K lemon that keeps giving, removed the old barrel and piston went to insert new piston and found the piston pin needed was a different size. The piston and pin removed were wiseco and the pin was 57mm long. I now need a pin I believe to be 61mm long. the Piston I do not know what make but details are on the face has CD and -010 printed and under the pin support has the number 504 and on the other one an indescribable stamp. If anyone has the original pin part 214-11633-00 could they tell me the length. Or can anyone identify the piston. Need pin and circlips, thanks Barry

13
Spaniards (Bultaco, Ossa, Montesa etc) / Re: Ossa Super Pioneer 350
« on: February 22, 2018, 02:26:17 PM »
thank you

14
Spaniards (Bultaco, Ossa, Montesa etc) / Ossa Super Pioneer 350
« on: February 22, 2018, 10:32:10 AM »
I have just had a bloke contact me with a super pioneer 350.  Wanted some info.

Are there many in Australia?

Who imported them?

Any other info on them

He also asked did any dealer import the Ossas in the 2000's when there was a resurregence


Barry

15
Other Makes (CanAms, Coopers, etc) / Re: Zundapp 125
« on: January 25, 2018, 11:27:54 PM »
My totally wrecked motor (took2 to make one) was built by Paul Gibbs over here in the West

Pages: [1] 2 3 ... 139