Messages

1

Tech Talk / Re: Tail light issue on 06 KTM 250 exc

« on: August 21, 2023, 01:35:08 PM »

Thanks for the reply Pokey, all sorted.

2

Tech Talk / Tail light issue on 06 KTM 250 exc

« on: August 13, 2023, 01:03:02 PM »

I recently just bought an 06 KTM 250 EXC. It came with no tail light and I've just installed an aftermarket tail light and when I put the brakes on the tail light will turn off! Any help would be appreciated.

3

Tech Talk / Re: Twin shocks for RM400T

« on: January 03, 2021, 10:51:42 AM »

Thanks for the replies everyone.

Thanks Wasp for the link. I also come across the RG362 Off-Road Twin Shocks on your website but they are not in the store in the link you provided. Are they still available?

4

Tech Talk / Twin shocks for RM400T

« on: January 01, 2021, 03:15:15 PM »

Hi all, I'm considering getting new shocks on my RM 400T. I have had the original shocks rebuilt by Rad in Brisbane but have always wanted to upgrade them if I could. I have had a bit of a google and have found YSS have shocks for the 400T. Any other brands worth considering?

Thanks

5

Suzuki / RM 400T axle spacers

« on: September 21, 2019, 12:04:44 PM »

Hi all,

I contacted Suzuki and the left and right rear axle spacers are no longer available for the RM 400T. Is there a later models ones I can use?

Thanks

6

Tech Talk / Re: Pro-Form exhaust fit

« on: September 10, 2018, 11:25:36 AM »

Thanks for the replies. I will give the red silicone a go.

7

Tech Talk / Pro-Form exhaust fit

« on: September 08, 2018, 10:44:18 AM »

Hi all. I have a Pro-Form exhaust on my RM 400T at the cylinder head I can't seem to get a good seal, a little bit of smoke seems to leak out and oil gets on the front mudguard. Is there some sort of sealant I can use to stop it leaking?

Thanks

8

Tech Talk / Changing exhaust

« on: July 09, 2018, 02:19:38 PM »

Just wondering how does changing an exhaust pipe affect the jetting? For example going from a stock exhaust to a pro form exhaust.

Thanks

9

Suzuki / Re: RM 400T swingarm

« on: May 05, 2016, 09:53:21 AM »

The bike was my dad's and he bought it brand new. I have been slowly restoring it over the past 6 years. I suspect that the swingarm bearing/bushes etc are still original so I will get those all replaced and see how it looks then. Anyone recommend anyone in Brisbane to replace swingarm bearings?

Thanks for the replies.

10

Suzuki / Re: RM 400T swingarm

« on: May 04, 2016, 08:31:26 PM »

Maybe 3-5mm.

11

Suzuki / RM 400T swingarm

« on: May 04, 2016, 06:30:39 PM »

I recently replaced the thrust washers and the dust covers on the swingarm. I looked the parts diagram on the alpha sports  and got the parts from suzuki. I noticed when I put the swingarm back on there is a gap betwen the dust cover and the frame. Its like there needs to be another washer either side to close the gap. Have I missed something?

12

Tech Talk / Re: Air Box lid

« on: April 25, 2016, 03:14:06 PM »

RM 400T

13

Tech Talk / Air Box lid

« on: April 25, 2016, 08:49:40 AM »

Hey guys, just wondering if anyone keeps the air box lid on? Does it restrict the air too much? Also I bought a uni filter and they come with a cover for the filter, does anyone use the cover or does it restrict too much air as well?

Thanks

14

General Discussion / Re: Mikuni jets

« on: April 22, 2016, 10:29:25 PM »

After a 42.5

15

General Discussion / Mikuni jets

« on: April 22, 2016, 06:28:39 PM »

Does anyone know of anyone that stocks Mikuni jets in the Brisbane area? I'm after a pilot jet.I know I can get ine from Minkunioz but I was hoping to get them locally.