OzVMX Forum

Clubroom => Tech Talk => Topic started by: dirtrumpy on May 02, 2018, 10:25:26 PM

Title: Mikuni jet needle
Post by: dirtrumpy on May 02, 2018, 10:25:26 PM
Does anyone here have the specs for a mikuni 6dh20 jet needle? Can't find it anywhere, mikuni oz can't help either.

Title: Re: Mikuni jet needle
Post by: bazza on May 03, 2018, 08:16:21 AM
Do you mean  6DH2 ? = 62.3 mm long.  If so i have specs and can send (from old Mikuni manual)
Title: Re: Mikuni jet needle
Post by: dirtrumpy on May 03, 2018, 08:30:52 AM
No, it is the 6dh20 im after, mikuni oz have them in stock but strangely don't know the specs for them, can't find anywhere on the net either
Title: Re: Mikuni jet needle
Post by: bazza on May 03, 2018, 09:39:34 AM
Seems the 500cc Husky 1984 runs that needle. Seonosale says they have them and some on e/bay - perhaps see if those firms can give you specs?
Title: Re: Mikuni jet needle
Post by: skypig on May 04, 2018, 12:35:55 AM
No, it is the 6dh20 im after, mikuni oz have them in stock but strangely don't know the specs for them, can't find anywhere on the net either

What’s the cost of one?
Title: Re: Mikuni jet needle
Post by: dirtrumpy on May 04, 2018, 07:23:19 AM
Only around $15 and already on order. Just wondering where it sits relative to the others.
Title: Re: Mikuni jet needle
Post by: bigk on May 04, 2018, 02:37:58 PM
6DH20 is not a Husky 500 needle (7DH3). It is however used in some CR/WR125's & CR/XC250's. I don't have the specs but last time I checked one against the common Husky 6DH3 needle, it was longer by an obvious amount. I used one in a CR430 which would normally use a 6DH3 & it seemed to clean up the bottom & mid.
Cheers,
K
Title: Re: Mikuni jet needle
Post by: bazza on May 04, 2018, 02:43:23 PM
apologies husky rider said thats what his 84 needle was
Title: Re: Mikuni jet needle
Post by: bigk on May 04, 2018, 04:52:21 PM
No apologies required, his 500 may have one in it but it's not standard issue for 500's. I don't reckon it would work that well in  VM40 or VM44 though, they generally require 7 series needles.
K