OzVMX Forum

Marketplace => For Sale => Topic started by: LWC82PE on June 21, 2015, 05:05:22 PM

Title: 82 XL500 forks
Post by: LWC82PE on June 21, 2015, 05:05:22 PM
Got a good useable set of 37mm XL500 forks. $35
please ask if you need more details but basically they are only this cheap because they are in the way taking up space and i just want to get rid of them. Will be posted partly disassembled.
I also have some 82 XR500 triples too.

(https://hjvw0q.bn1303.livefilestore.com/y2paRWf8M0sV8LCHZruccBIZ7XwwxkFNqppIu-dQx9T6UQOSRWSPdGblsmrToFjQahr_o7P8g0G4KXQKfS48cSyIlLd0oPLHvdbO8M0YnznNN6c5jgPh4Vyq6JCZeFGu_xQv4-5GSdYRnFqtGryPLL7Qg/FORK%20SLIDERS.JPG?psid=1)

(https://hjvw0q.bn1304.livefilestore.com/y2p3L15-5D0BHEau5O_VRUH9Sz7LOQhVjmzZ_uCCHydVUp1tp2zHVu69B3uGLqk8tOF8eKg2G0rJ90I0bHVnoBMep1CSuyR0QTC7jpMVJomq_bT7ZuaMzoK9xIGTsDAt2Hjdd62Y2rda7OdVWHxyc-rHA/FORK%20LEGS%20HON.JPG?psid=1)
Title: Re: 82 XL500 forks
Post by: bebolly on December 26, 2017, 11:11:40 PM
Hey don’t suppose you still have these?
Title: Re: 82 XL500 forks
Post by: matcho mick on December 27, 2017, 12:06:51 PM
Hey don’t suppose you still have these?
2015,for $35,there's supreme optism right there  ;D, :P
Title: Re: 82 XL500 forks
Post by: LWC82PE on December 27, 2017, 01:34:47 PM
YES i still have them and the triple clamps.

https://forum.ozvmx.com/index.php?topic=37417.msg362674#msg362674
Title: Re: 82 XL500 forks
Post by: 80-85 husky on December 27, 2017, 02:17:21 PM
thats perseverance
Title: Re: 82 XL500 forks
Post by: bebolly on December 29, 2017, 10:23:34 AM
Just sent you a pm
Title: Re: 82 XL500 forks
Post by: LWC82PE on December 30, 2017, 10:28:56 AM
Still for sale. Buyer wanted XR forks. Mine are XL as far as i know.
Title: Re: 82 XR500 forks
Post by: LWC82PE on January 08, 2018, 07:25:45 PM
I found out these are XR forks after all. Previous owner must of upgraded to them. I found out when looking at the drawings of the sliders on CMS, plus they just seemed too long/too much travel to be XL forks.

I pulled one apart to measure in MM

slider from axle hole to top - 355
exposed chrome (from top edge of slider) fully extended - 581-582
exposed chrome (from top edge of slider)  when fully bottomed - 333-334

total length of fork extended (axle to top of inner) - 936 - 937
travel in mm - 247-249
travel in inches - 9.724 - 9.803

damper rod length from under the piston/head to base is 305mm
total tip to tip length of chrome inner rube is 752mm

Fork caps have ugly external damage but i got some DG caps that fit these forks.
Title: Re: 82 XL500 forks
Post by: TT5 Matt on January 09, 2018, 03:07:58 PM
I'll take the forks and matching triples,they'll be an improvement on the skinny forks they put on my xr200a
Title: Re: 82 XL500 forks
Post by: LWC82PE on January 10, 2018, 11:23:19 AM
Forks are SOLD

I still have the triples and the DG fork caps though.