Author Topic: Wanted YZ125C air boot rubber or complete airbox (Read 4915 times)

micko · « **on:** August 05, 2015, 10:50:51 PM »

Or any leads where to find/buy

Rossvickicampbell · « **Reply #1 on:** August 05, 2015, 11:59:31 PM »

is this the one you are looking for?

http://www.ebay.com/itm/NOS-YAMAHA-1976-yz125-yz100-air-filter-to-carburetor-joint-537-14453-00-00-/261988715493?hash=item3cffbe8be5&vxp=mtr

Rossvickicampbell · « **Reply #2 on:** August 06, 2015, 12:01:35 AM »

http://www.ebay.co.uk/itm/YAMAHA-NOS-AIR-CLEANER-JOINT-1-YZ100-YZ125-537-14453-00-/370933242307

micko · « **Reply #3 on:** August 06, 2015, 10:25:38 AM »

That's the one, expensive little bugger !

Rossvickicampbell · « **Reply #4 on:** August 06, 2015, 02:54:27 PM »

my first thoughts also!

Iain Cameron · « **Reply #5 on:** August 06, 2015, 07:32:34 PM »

Try Speed and sport in the US they are making reproductions . Also Known as Yam top dog .

Rossvickicampbell · « **Reply #6 on:** August 06, 2015, 09:16:03 PM »

Iain - I see they list stock - and significantly cheaper as well - are these the repos?

cheers

Rossco

Rossvickicampbell · « **Reply #7 on:** August 06, 2015, 09:18:42 PM »

there is also a guy parting out a 125C on Marks at the moment?

Iain Cameron · « **Reply #8 on:** August 07, 2015, 09:24:42 PM »

Rossco Yes they are repo's but their other bits are very good . Micko I'll have a look in the cave this weekend not promising but I think I might have a 125x one if that's the same . Iain

micko · « **Reply #9 on:** August 07, 2015, 09:43:22 PM »

Cheers guys, much appreciated.

micko · « **Reply #10 on:** August 07, 2015, 09:58:52 PM »

1G8-14453-00-00 JOINT, AIR CLEANER YZ125X

537-14453-00-00 JOINT, AIR CLEANER YZ125C

Looks the same part number, just different prefix

Paulos · « **Reply #11 on:** August 07, 2015, 10:22:53 PM »

Different size carby from the c to x, 30 vs 34mm

Iain Cameron · « **Reply #12 on:** August 08, 2015, 05:16:51 PM »

That's the internal size Paulos , Mick get me a out side dia measurement of the bell .

Paulos · « **Reply #13 on:** August 08, 2015, 05:50:41 PM »

I think the 28mm and 30mm are the same and the 32 and 34 are the same.

I don't think it'll matter though if you're putting a 30mm carb into an X airbox rubber, might be tricky the other way around though

micko · « **Reply #14 on:** August 11, 2015, 03:05:33 PM »

ok, I will check tonite

micko · « **Reply #15 on:** August 12, 2015, 11:29:09 PM »

Iain, the bell od is 50mm

Iain Cameron · « **Reply #16 on:** August 13, 2015, 07:37:05 PM »

Ok I'll get back to you soon . Iain

Iain Cameron · « **Reply #17 on:** August 15, 2015, 03:46:17 PM »

Mine is 52mm inside you could use a 2mm rubber strip or make up something . anyway yours if you want it .Iain

Paulos · « **Reply #18 on:** August 15, 2015, 06:30:24 PM »

Quote from: Iain Cameron on August 15, 2015, 03:46:17 PM

Mine is 52mm inside you could use a 2mm rubber strip or make up something . anyway yours if you want it .Iain

... or a 1mm rubber strip.

I'm pretty sure i ran a 30mm carb in the "x" boot originally. The clamp tightens up well enough to seal it. If you can get your hands on an X barrel and upgrade to a 34mm carb it'd be even better.

Iain Cameron · « **Reply #19 on:** August 15, 2015, 06:44:19 PM »

... or a 1mm rubber strip.
Grey moment haha 1mm either side .

Paulos · « **Reply #20 on:** August 15, 2015, 09:20:36 PM »

Quote from: Iain Cameron on August 15, 2015, 06:44:19 PM

... or a 1mm rubber strip.
Grey moment haha 1mm either side .

I know your pain

micko · « **Reply #21 on:** August 15, 2015, 09:40:37 PM »

Thanks guys,Iain I will pm you